Garmin GPSMAP 76C Owner's Manual

Also see for GPSMAP 76C: Specification sheet

Contents

Garmin GPSMAP 76C Owner's Manual Manual pdf 11 page image

1GPSmap 76CBattery Installation andStart UpImportant NoteWhen replacing batteries, use only new or fullycharged batteries. Do not mix Alkaline and NiMH bat-teries. Rechargeable batteries may typically display lesscapacity than disposable batteries.Remove the batteries from the unit if you don’t planto use it for several months. Storing batteries in theunit for prolonged periods may result in leakage anddamage to the battery compartment.Follow the manufacturer’s instructions for proper careand disposal of used batteries. Do not incinerate usedbatteries, as internal materials may ignite with explosiveviolence.Extensive use of backlighting and/or WAAS as well askey beep tones will significantly reduce battery life.To set backlighting intensity and timeout, see page 48.To disable WAAS, see page 47.To mute the beep tones, see page 50.Getting StartedInstalling the BatteriesThe GPSmap 76C operates on two “AA” batteries (not included),which are located in the back of the unit. Alkaline or NiMH batteries(see page 47 for setting the battery type) may be used. Stored data willnot be lost when batteries are removed.T o install batteries:1. Remove the battery cover from the back of the unit. Turn theD-Ring 1/4 turn counter-clockwise and then pull.2. Insert the batteries, observing the proper polarity. A polaritydiagram can be found moulded into the battery compartment.3. Reinstall the battery cover by reinserting the locking pin inthe back of the unit. Turn theD-Ring 1/4 turn clockwise tolock in place.Battery CompartmentLockingPin SlotBattery CompartmentCoverLocking D-RingBack ofGPSmap 76C