Garmin GSD 22 Installation Instructions Manual

Also see for GSD 22: Installation instructions Installation instructions Declaration of conformity

Contents

3GSD 22 Sonar ModuleINSTALLATION INSTRUCTIONSCANet Wiring for the Garmin GSD 22Notes:1. Power and ground wires require 18 AWG. You can extend the CANet wiring of the GSD 22 power/data cable up to 80 ft (24.38 m) total length using theCANet Connections Kit.2. The CANet Extension Cable can support a maximum of two display units and one sonar unit.3. The maximum length of cable from the CANet Extension Cable to the sonar or display units is 6 ft.4. Refer to the chartplotter’s installation instructions for wiring the GPS 17 sensor and other devices.5. Ground the drain wire on the first display unit. Do not ground the drain wire on the subsequent display units or the sonar unit.6. The CANet Extension Cable Black wire is reserved for future use. When inserting a CANet unit on the CANet Extension Cable, reconnect all wires accordingto their color.GreenWhiteGreen3 wire connector3 wire connectorGreenWhiteWhiteTo Sounder To ChartplotterCANet TerminatorGSD 22SOUNDERMODULEBLACKORANGEGREENWHITECANetTerminatorCANetTerminatorCANetExtension CableREDBLACKFUSE3ABLACKDRAINORANGEGREENWHITEBATTERY10-35 VOLTS DCSee the CANet TerminatorConnection Diagram BelowCANetUnit CANetUnit CANetUnitThe CANet Extension Cable can be cut to any length1 ft to 80 ft and a CANet compatible device can beinserted on the cable at any point between the two CANetTerminators.CANetTerminatorCANetTerminatorCANet Terminator Connection Multiple CANet Unit Connection