Garmin GTX 32 Installation Manual

Garmin GTX 32 Installation Manual Manual pdf 15 page image

GTX 32 Installation Manual Page 2-1190-00303-60 Revision F2 INSTALLATION OVERVIEW2.1 IntroductionThis section provides hardware equipment information for installing the GTX 32 Transponder, relatedhardware and optional accessories. Installation of the GTX 32 should follow the data detailed in thismanual. Cabling is fabricated by the installing agency to fit each particular aircraft. The guidance ofFAA advisory circulars AC 43.13-1B and AC 43.13-2A, where applicable, may be found useful formaking retro-fit installations that comply with FAA regulations.Refer to the G1000 System Installation Manual, Garmin part number 190-00303-00 for further details onthe mechanical aspects. For installation in an aircraft using the remote mounted stand-alone rack refer toAppendix B for rack drawings and dimensions.2.2 Installation MaterialsThe GTX 32 is available as a single unit under the following part numbers:Item Catalog Part NumberGTX 32 (011-00768-00) 010-00265-002.2.1 Equipment AvailableEach of the following accessories is provided separately for the GTX 32 unit and is required forinstallation.Item Garmin Catalog Part NumberG1000 Install Rack, GTX 32 115-00439-00G1000 Nutplate Kit 011-00915-01 (preferred) or011-01148-01OrGTX 32 Remote Stand-Alone Install Rack(Alternate Configuration)115-00628-00Connector Kit, GTX 32 011-01013-00 (SPIDER) or011-01013-01 (Shield Block)Backplate Assembly, GTX 32 011-00677-01Garmin Transponder Antenna kit* 010-10160-00*Note: A transponder antenna approved to TSO C66( ) or C74( ) that has been installed to meetthe requirements of this manual may be used with the GTX 32.