Garmin GTX 327 Installation Manual

Also see for GTX 327: Pilot's guide Pilot's guide Installation manual Pilot's guide Pilot's guide

GTX 327 Installation Manual Page 31190-00187-02 Rev J3.3.7 AIRCRAFT TYPE PageSELECTION DESCRIPTIONAC TYPE UNKNOWN, <15.5K, >=15.5K, or ROTOR.AIRCRAFT TYPEUsed for Automated Airborne Determination (time to STBY, required airspeed, ground speed). Sets theAIRCRAFT TYPE to ROTOR, to a weight of less than 15,500 pounds, more than or equal to 15,500pounds, or unknown weight. Defaults to less than or equal to 15,500 pounds.3.3.8 RS-232 INPUT VIEW PageDepending on the selected inputs on Channel 1 and Channel 2, this page displays the informationreceived on the channel. If GPS is selected as an input, ground speed (GSPD), latitude (LAT), longitude(LON) and track (TRK) can be viewed.If ICARUS or SHADIN-ALT is selected as an input, pressure altitude (PALT) can be viewed.If SHADIN-FADC or SHADIN-ADC is selected as an input, true or static air temperature (SAT), outsideor total air temperature (TAT), indicated air speed (IAS), true air speed (TAS), density altitude (DALT),pressure altitude (PALT), current barometric pressure (BARO) and vertical speed (VSPD) can be viewed.3.3.9 GRAY CODE INPUT PageInformation on this page may aid in installationtroubleshooting. There are no user inputs or operations onthis page.GRAY CODEThis field shows the status (1 = ground, 0 = open) of each of the ten gray code altitude inputs. Thisinformation may aid in installation troubleshooting. This page is not used in systems that contain serialaltitude input.DECODED ALTITUDEThis field displays the gray code altitude input in feet. Verify that it is the correct altitude.AIRCRAFT TYPE PageRS-232 INPUT VIEW PageGRAY CODE INPUT Page