Garmin GTX 3X5 Series Pilot's Manual

Also see for GTX 3X5 Series: Installation manual Installation manual Installation manual Pilot's guide

Contents

Garmin GTX 3X5 Series Pilot's Manual Manual pdf 21 page image

190-01499-00 Rev. A Garmin GTX 335/345 Pilot’s Guide 3-53 – DISPLAY FUNCTIONS/SETTINGSINTERNAL GPS – If configured, this page displays the status of theinternal GPS. The GPS position fix details are viewed via CRSR keyselection.3.4.1 Bluetooth Pairing InstructionsFor first time activation of Bluetooth devices:1. Go to the GTX 345 Bluetooth page to enable pairing mode. Refer to figure 3-3.2. Enable Bluetooth on the PED.3. Select “GTX 345” from the list of available devices on the PED. Refer tomanufacturer’s information for pairing instructions.4. When a PED sends a pairing request the Bluetooth Pair Request page willdisplay the device name and passkey. Refer to figure 3-4.5. Press ENT on the GTX 345 and accept the pairing request on PED.Figure 3-3 Bluetooth PageFigure 3-4 Bluetooth Pair Request Page3.4.2 Bluetooth Paired Device Information1. To view the paired device list, press the CRSR key.2. To view the menu and pairing status, press the 8 and 9keys, respectively.3. Then press the ENT key.The Paired Devices list page will display. Refer to figure 3-5.Figure 3-5 Paired Device List PageMore information about each paired device and applicable settings can be found bydoing the following steps:1. To set the auto-reconnect status, highlight the paired device.2. Then press ENT key. Refer to figure 3-6.Figure 3-6 Auto-reconnect Page