GWS 10 installation instructions EN–ENGWS 10 Wind Sensor Installation InstructionsTo obtain the best possible performance, install your GWS 10 Wind Sensor according to the following instructions. If you experience difficultyduring the installation, contact Garmin Product Support, or seek the advice of a professional installer.The GWS 10 communicates with NMEA 2000®-compatible chartplotters and displays. Refer to www.garmin.com for a list of compatibledevices.See the Important Safety and Product Information guide in the product box for product warnings and other important information.CautionsAlways wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.When drilling or cutting, always check the opposite side of the surface. Be aware of fuel tanks, electrical cables, and hydraulic hoses.Use caution when working from heights.•••Product RegistrationHelp us better support you by completing our online registration at www.garmin.com/registration/.For future reference, write the serial number assigned to your GWS 10 in the space provided. It is located on a sticker on the unit.Serial numberContact GarminContact Garmin Product Support if you have any questions while using your GWS 10. In the USA, go to www.garmin.com/support, or contactGarmin USA by phone at (913) 397-8200 or (800) 800-1020.In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.In Europe, go to www.garmin.com/support and click Contact Support for in-country support information, or contact Garmin (Europe) Ltd. byphone at +44 (0) 870.8501241.Packing List and AccessoriesBefore installing your unit, confirm that your package includes the following items. If any parts are missing, contact your Garmin dealerimmediately.GWS 10 with GMI 10 Bundle Package or GWS 10 Package:GWS 10 Wind Sensor unitGWS 10 Wind Sensor mounting hardware2 NMEA 2000 terminators (1 female, 1 in-line)NMEA 2000 backbone cableField-installable connectorIn-line lightning arrestorGWS 10 Installation Instructions•••••••GWS 10 with GMI 10 Bundle Package:GMI 10 unitProtective coverGMI 10 flush mount hardwarePower/data wiring harnessNMEA 2000 power cableNMEA 2000 drop cableNMEA 2000 T-connector and terminator kitGMI 10 Installation Instructions and GMI 10 Quick Start ManualAdditional Optional Items (not included):Additional NMEA 2000 network componentsTools Needed (not included):Phillips screwdriverDrill and drill bits•••••••••••