Garmin HRM-DUAL Quick Start Manual

Also see for HRM-DUAL: Quick start manual Quick start guide Installation instructions

Contents

limited warranty

• Look for the Bluetooth logo on compatible fitness equipment.Replacing the Heart Rate Monitor Battery1 Use a small Phillips screwdriver to remove the four screws onthe back of the module.2 Remove the cover and battery.3 Wait 30 seconds.4 Insert the new battery with the positive side facing up.NOTE: Do not damage or lose the O-ring gasket.5 Replace the back cover and the four screws.NOTE: Do not overtighten.After you replace the heart rate monitor battery, you may needto pair it with the device again.Heart Rate Monitor SpecificationsBattery type User-replaceable CR2032, 3 VBattery life Up to 3.5 yr. at 1 hr./dayWater resistance 1 ATM*NOTE: This product does not transmit heartrate data while swimming.Operating temperaturerangeFrom -5° to 50°C (from 23° to 122°F)Wireless frequency/protocol2.4 GHz @ 2 dBm nominal*The device withstands pressure equivalent to a depth of 10 m.For more information, go to www.garmin.com/waterrating.Limited WarrantyThe Garmin standard limited warranty applies to this accessory.For more information, go to www.garmin.com/support/warranty.html.Quick Start Manual 3

/ 4

Related manuals for Garmin HRM-DUAL