MAP PILOT owner’s manual 154 Rotate the browse map tools wheel to select an option:• Select Set Location to set your current location� Youcan maneuver the controller over the map to find specificlocations�NOTE: You must have your MAP PILOT set to simulationmode and you must not be navigating a route to setlocations�• Select Layers to select which map layers to display onthe map� You can select any combination of Traffic, 3DBuildings, 3D Terrain, and Points of Interest�• Select Rotate Mode to enable a rotated view of the map�• Select View Toggle to view the map in 3-D or 2-D NorthUp�• Select Points of Interest to browse for businnesses andattractions near the current map section�• Select Locations Details to display details of yourcurrent or selected location�Starting a Route1 Search for a location (page 8)�2 Select a location�3 Select Go!�Stopping the RouteFrom the main menu, select �Following a RouteThe route is marked with a magenta line� A checkered flagmarks your destination�As you travel, the navigation system guides you to thedestination with voice prompts, arrows on the map, directions atthe top of the map, and guidance information in the instrumentcluster display� If you depart from the original route, the systemrecalculates the route and provides new directions�