Garmin Mobile 10x Set Up And Go Manual

Contents

Garmin Mobile ™ for BlackBerry ® set up and go! If the GPS 10x receiver has not established aBluetooth connection for several minutes, it turns offautomatically.To manually turn the GPS 10x receiver off, press andhold the Power button.➎ Pair the GPS 10x ReceiverBluetooth wireless technology establishes a wirelesslink between your BlackBerry device and the GPS 10xreceiver. Before you can use the GPS 10x receiver, youmust “pair” it with your BlackBerry device.Make sure your BlackBerry device and GPS 10xreceiver are turned on and within 10 meters (about30 feet) of each other.Enable your BlackBerry device’s Bluetoothcomponent. This might be in Options > Bluetoothor Settings > Bluetooth.Initiate a search for Bluetooth devices.Select GPS 10x from the list of devices.Enter the GPS 10x receiver’s Bluetooth passkey(1234) into your BlackBerry device.1.2.3.4.5.For instructions about pairing and Bluetooth, refer toyour BlackBerry device’s documentation.The GPS 10x receiver and your BlackBerry deviceautomatically connect when they are both turned onand within 10 meters (about 30 feet) of each other.➏ Complete the SoftwareInstallationFollow the link on your BlackBerry device todownload the Garmin Mobile software.Open the Garmin Mobile application on yourBlackBerry device.Follow the on-screen directions to test theBluetooth connection.To activate the software, enter the activation code(from step 3 of ➊ Install the Navigation Softwareon page 1) .If you have lost your activation code, sign in to yourmyGarmin account at http://my.garmin.com. ClickGarmin Mobile for BlackBerry, and then clickregenerate activation Code.1.2.3.4.