nüvi 1300 Series Quick Start Manual 3Setting Up Your nüviBefore mounting the nüvi, see the Important Safety and Product Information guide for informationabout laws pertaining to windshield mounting.Mounting Your nüvi1. Remove the clear plastic from the suction cup. Place the suction cup on thewindshield.2. Flip the lever back toward the windshield.3. Snap the cradle onto the suction cup arm.4. Plug the vehicle power cable into the back ofyour nüvi.5. Plug the other end of the vehicle powercable into a power outlet in your vehicle.Your unit should turn on automatically if it is plugged in and the vehicle isrunning. Follow the on-screen instructions.6. Fit the bottom of your nüvi into the cradle.7. Tilt your nüvi back until it snaps into place.8. If you are using a traffic receiver in Europe,connect the external antenna to the trafficreceiver and secure it to the windshield usingthe suction cups. (Traffic receivers are includedin some nüvi packages.)Warning: This product contains a lithium-ion battery. To prevent damage, remove the unit from thevehicle when exiting or store it out of direct sunlight.Suction cup mountCradleSuction cup mountCradleVehicle powercableVehicle powercable