Garmin RV-IN1501 Installation Instructions Manual

Also see for RV-IN1501: Owner's manual

Contents

Garmin RV-IN1501 Installation Instructions Manual Manual pdf 4 page image

Installing the Infotainment SystemTo install the infotainment system, you need a custom metalbracket supplied by the RV manufacturer.1 Remove the dash trim and bezel around the stereoinstallation location.2 If necessary, attach the metal bracket supplied by the RVmanufacturer to the dash according to the RV manufacturerspecifications.3 Connect the included wiring harnesses to the vehicle wiringharness and other A/V connectors as needed.You can consult the wiring diagrams to identify specificconnectors and wires (Wiring Harnesses, page 2).4 Route all harnesses and other wiring through the opening inthe dashboard, and make all necessary wiring connections tothe back of the infotainment system (Connector Identification,page 2).5 Place the RV-IN1501 infotainment system into the bracketand dashboard, inserting the four threaded rods throughthe four holes in the bracket.6 Place the four included washers onto the threaded rods.7 Thread the four included wingnuts onto the threaded rods,and tighten them to secure the infotainment system to thebracket.8 Install the dashboard trim and bezel around the infotainmentsystem.Stereo InformationSpecificationsGeneralOperating temperature range From -10 to 60°C (from 14 to 140°F)Storage temperature range From -20 to 70°C (from -4 to 158°F)Input voltage From 10.8 to 16 VdcCurrent (max.) 15 ACurrent (muted) Less than 1 ACurrent (standby mode) Less than 5 mAFuse 15 A mini blade-typeBluetooth®wireless range Up to 10 m (30 ft.)ANT®wireless range Up to 3 m (10 ft.)Wireless frequencies/protocolsWi‑Fi®2.4 GHz @ +15 dBm nominalBluetooth 2.4 GHz @ +10 dBm nominalANT 2.4 GHz @ +4 dBm nominalOn-board, Class D AmplifierOutput music power perchannel4 x 70 W max. 2 ohmTotal output peak power 280 W max.Output power per channel 4 x 43 W RMS at 14.4 Vdc input,2 ohm, 10% THD*4 x 26 W RMS at 14.4 Vdc input,4 ohm, 10% THD*Line output level (max.) 5.5 V (peak to peak)Aux input level (typical) 1 V RMS*The stereo may limit the output power to prevent the amplifierfrom overheating, and to maintain the audio dynamics.Tuner Europe andAustralasiaUSA JapanFM radiofrequency range87.5 to 108 MHz 87.5 to107.9 MHz76 to 95 MHzFM frequencystep50 kHz 200 kHz 50 kHzAM radiofrequency range522 to 1620 kHz 530 to1710 kHz522 to1620 kHzAM frequencystep9 kHz 10 kHz 9 kHz© 2018 Garmin Ltd. or its subsidiariesGarmin®, the Garmin logo, FUSION®, and the Fusion logo are trademarks of Garmin Ltd.or its subsidiaries, registered in the USA and other countries.Android™ is a trademark of Google Inc. Apple®, the Apple logo, iPod®, and Mac®aretrademarks of Apple Inc., registered in the U.S. and other countries. Bluetooth®wordmark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks byGarmin is under license. microSD®and the microSDHC logo are trademarks of SD-3C,LLC. SiriusXM®is a registered trademark of SiriusXM Radio Inc. Wi‑Fi®is a registeredtrademark of Wi-Fi Alliance Corporation.support.garmin.com

/ 4

Related manuals for Garmin RV-IN1501