Garmin SL30 Pilot's Manual

Also see for Apollo SL30: Installation manual Quick reference guide Pilot's guide Installation

22Advanced OperationNav Mode DST Data DisplayWhen the SL30 has received data from an external device, such as a DME sensor, throughthe serial port, DST data is added to the Nav recall list. If you aren’t connected to an externalsensor, you will not see this display. If the display of Distance-Speed-Time (DST) data is notactivated, you will be prompted to show the data when you view the DST selection in thechannel recall lists.109.90 s117.40 99.9 111 0:54i jDistance from station in nautical milesGround speed relative to station in knotsEstimated time to station in hours and minutesEnable DST Data Display1. In Nav mode, press SEL. Then, turn the ENT knob to the DST Data list.111.80 s117.40 show dst data?2. Press ENT to enable the display of DST data. DST information will now replace the Nav information onthe Nav mode display.111.80 s117.40 99.9nm 111kt 0:54Disable DST Data Display1. In Nav mode, press SEL. Then, turn the LARGE knob to the DST Data item.111.80 s117.40 remove dst data?