190-00709-04 Rev. A Garmin G1000 Pilot’s Guide for the Socata TBM 850 125AUDIO PANEL AND CNSAUTO-TUNING A NAV FREQUENCY FROM THE MFDNAV frequencies can be selected and loaded from the following MFD pages:• WPT – Airport Information• WPT – VOR Information• NRST – Nearest Airports• NRST – Nearest VOR• NRST – Nearest Frequencies (FSS, WX)• NRST – Nearest AirspacesThe MFD provides auto-tuning of NAV frequencies from waypoint and nearest pages. During enroutenavigation, the NAV frequency is entered automatically into the NAV standby frequency field. During approachactivation the NAV frequency is entered automatically into the NAV active frequency field.Frequencies can be automatically loaded into the NAV Frequency Box from pages in the NRST or WPT pagegroup by highlighting the frequency and pressing the ENT Key (Figures 4-23, 4-24, and 4-25).Auto-tuning a NAV frequency from the WPT and NRST Pages:1) From any page that the NAV frequency can be auto-tuned, activate the cursor by pressing the FMS Knob on theMFD control unit or selecting the appropriate softkey.2) Turn the FMS Knob to place the cursor on the desired NAV identifier or NAV frequency.3) On the Nearest VOR, Nearest Airspaces, and Nearest Airports pages, select the FREQ Softkey to place the cursoron the NAV frequency (Figure 4-25).4) Press the ENT Key to load the NAV frequency into the standby field of the selected NAV radio.5) Press the Frequency Transfer Key to transfer the frequency to the NAV Active Frequency Field.Press theENT Key to Load aHighlighted Frequency into theNAV Standby Frequency Box.Turn theFMSKnob to ScrollThrough a Listof Frequencies.Figure 4-23 NAV Frequency Auto-Tuning from the MFD
