Garmin StreetPilot 2730 Owner's Manual

Also see for StreetPilot 2730: Owner's manual Set up and go Owner's manual

Garmin StreetPilot 2730 Owner's Manual Manual pdf 19 page image

StreetPilot 2730 Owner’s Manual 11VIEWING THE MAP AND OTHER PAGESGPS InfoThe GPS Info page displays the GPS receiver status,including current satellite coverage, receiver status, andposition accuracy. To access this page, open the Menupage and touch Tools > GPS Info. From the map, youcan touch the signal strength bars while the receiver isestablishing a fix to view the GPS Info page.Sky viewSatellite signalstrength barsThe sky view provides an overhead view of each satelliteposition relative to your unit’s last known location. Theouter circle represents the horizon. The inner circlerepresents an elevation of 45° above the horizon. Anysatellite depicted near the center is directly overhead.A signal strength bar appears for each satellite in view.A hollow bar indicates the GPS receiver has found thesatellite and is collecting data. A solid bar indicates theGPS receiver has collected the necessary data, and thesatellite is ready for use.GPS SettingsFrom the Menu page, touch Tools > GPS Info > GPSSettings. You can also access the GPS Settings bytouching the GPS Settings button on the GPS Info page.Use Indoors—touch Yes to turn the GPS receiver offand use the unit indoors.Set Position—if the GPS receiver has not established afix on your location, you can enter your current location.From the GPS Settings page, touch Set Position. Selectyour location using the map and touch OK.WAAS/EGNOS—disable and enable WAAS/EGNOS.To learn about WAAS, visit http://www.garmin.com/aboutGPS/waas.html.