Garmin StreetPilot III Quick Reference Manual

Also see for StreetPilot III: Owner's manual Owner's manual & reference Specification Quick start guide Owner's manual and reference guide

Contents

6Main Page SequenceUnit Pages at a GlanceThere are three main pages on the StreetPilot III: the Map Page, Trip Information Page, and CurrentRoute Page. Press the PAGE or QUIT key to sequence through these pages.Virtual TourLet’s use the StreetPilot III’s built-in simulator to select a destination, plan a route, and see how theunit would operate in actual use. This simulated trip will involve the use of the FIND key to show youhow the StreetPilot III guides you through every turn with audible directions. First, if you haven’t alreadydone so, take the StreetPilot III outside and let it determine your current location.To determine your current position:1. Turn the StreetPilot III on by pressing the red POWER key. Make sure the antenna is pointing upwardand you are located in an area with a clear view of the sky.2. Press ENTER to acknowledge the power-on pages. The power-on process is complete when the MapPage appears (see page 8).3. Observe the message banner at the top of the Map Page. When the message changes from “AcquiringSatellites” to “Ready to Navigate” your StreetPilot III has determined your current position.You may now continue the remainder of the Virtual Tour indoors. Find a comfortable chair, sitback and enjoy the trip!The first time you use your new StreetPilot III, it willneed to search for GPS satellites and determine itslocation. This process may take several minutes.StreetPilot III is ready to guide you when the “Ready toNavigate” message appears.Map Page Trip Information PageCurrent Route PageAppears only when a destination is selected.PAGE QUITQuick Start