Garmin TACX NEO 3M Owner's Manual

6 If the bike derailleur makes contact with the trainer in the largest cassette gear, follow these steps:6.1Use the blue tool to remove the locknut .6.2Remove the freehub body with the cassette attached.6.3Remove the black spacer .6.4Add one or two spacers.6.5Install the black spacer, freehub body with cassette, and locknut.6.6Tighten the locknut.You can hand tighten the locknut using the blue tool . When using a torque wrench, Garminrecommends a maximum torque of 6 N-m (4.4 lbf-ft.) for the locknut.7 Tighten the lockring.Garmin recommends a torque of 40 N-m (29.5 lbf-ft.) for the Tacx NEO 3M cassette. For any other cassette,see the manufacturer's instructions.Device Care and StorageWARNINGSee the Important Safety and Product Information guide in the product box for product warnings and otherimportant information.• Unplug the trainer when it is not in use.• Check the alignment, and lock the motion plates when the trainer is not in use.• Wipe off the trainer after every use.• Clean the trainer before storing it.Folding the Trainer for Storage1 Check the alignment, and lock the motion plates.2 Lean the trainer back.Device Information 15

/ 22

Related manuals for Garmin TACX NEO 3M