Garmin Tempe Instructions Manual

Also see for tempe: Instructions Instructions

Contents

Garmin Tempe Instructions Manual Manual pdf 1 page image

InstructionsWARNINGSee theImportant Safety and ProductInformation guide in the GPS product boxfor product warnings and other importantinformation.Do not use a sharp object to removeuser-replaceable batteries.Contact your local waste disposal departmentto properly recycle the batteries. PerchlorateMaterial — special handling may apply. Seewww.dtsc.ca.gov/hazardouswaste/perchlorate.Separating the Sensor from theClip1 Press the tab (1) on the clip.2 Lift and separate the sensor (2) from theclip.Installing the Battery1 Locate the circular battery cover (1) onthe back of the device.2 Turn the cover counter-clockwise until itis loose enough to remove.3 Remove the cover.4 Place the battery into the cover with thepositive side facing the inside of thecover.5 Replace the cover by aligning the dots(2) and rotating clockwise.Installing the DeviceNOTICEThe sensor should be attached to a securestrap or loop.You can also place the sensor in anexterior jacket pocket.1 Place the clip behind the strap or loop.2 Align the arrow on the sensor and clip.3 Snap the sensor into the clip.Pairing the Sensor with yourDeviceBefore you can view temperature data onyour compatible GPS device, you must pairthe sensor with the device.32

/ 2

Related manuals for Garmin tempe