Garmin Tempe Instructions Manual

Also see for tempe: Instructions Instructions

Contents

Garmin Tempe Instructions Manual Manual pdf 2 page image

This procedure contains instructions for thefenix. If you have another compatible device,see your owner's manual.1 Move 10 m away from other ANT-sensors.2 Turn on the device.3 Bring the device within range (9.8 ft. or 3 m)of the sensor.4 Select the Orange key.5 Select Setup > ANT Sensor > Tempe >New Search.When the tempe is paired, the fenix displaystemperature data from the tempe instead ofusing the internal temperature sensor. Formore information, see thefenix Owner'sManual.Tips Place the sensor where it is exposed toambient air. Avoid locations where sunlight, body heat, orother conflicting hot/cold sources could affectthe sensor.SpecificationsBattery type User-replaceable CR2032, 3voltsBattery life Up to 1 yearWater resistance Water resistant to 32.9 ft.(10 m)Operating From -4°F to 140°Ftemperature range (from -20°C to 60°C)Radio frequency/ 2.4 GHz ANT+ wirelessprotocol communications protocol4FCC ComplianceThis device complies with part 15 of the FCCRules. Operation is subject to the following twoconditions: (1) this device may not cause harmfulinterference, and (2) this device must accept anyinterference received, including interference thatmay cause undesired operation.This equipment has been tested and found tocomply with the limits for a Class B digital device,pursuant to part 15 of the FCC rules. These limitsare designed to provide reasonable protectionagainst harmful interference in a residentialinstallation. This equipment generates, uses, andcan radiate radio frequency energy and maycause harmful interference to radiocommunications if not installed and used inaccordance with the instructions. However, thereis no guarantee that interference will not occur ina particular installation. If this equipment doescause harmful interference to radio or televisionreception, which can be determined by turningthe equipment off and on, the user is encouragedto try to correct the interference by one of thefollowing measures: Reorient or relocate the receiving antenna. Increase the separation between theequipment and the receiver. Connect the equipment into an outlet that ison a different circuit from the GPS unit. Consult the dealer or an experienced radio/TV technician for help.This product does not contain any user-serviceable parts. Repairs should only be made byan authorized service center. Unauthorizedrepairs or modifications could result in permanentdamage to the equipment, and void yourwarranty5

/ 2

Related manuals for Garmin tempe