Garmin VHF 200 Owner's Manual

Also see for VHF 100 series: Installation instructions Quick reference guide Declaration of conformity Manual Del Usuario

Garmin VHF 200 Owner's Manual Manual pdf 9 page image

VHF 100/200 Series Owner’s Manual Getting StartedTransceiver and Handset DisplayThe Home screen is the most-viewed screen in the system. It displays all of your currentinformation, such as the current channel, the frequency band, and the channel name.Frequency bandLatitudeTimeSpeed Over Ground/Course Over GroundSystem-statusiconsChannel LongitudeSoft keysUSA16DISTRESSWATCH PA SCAN“‰°Š‹.Œ‘’’ƒˆ‰Š°‹Œ.‘’“’†ˆ‰:‹Œ UTC””MPH ˆ’”°T–TX W25RX ATIS1W LOCALChannel—current working channel.Frequency band—current frequency band: International, Canadian, or USA.Latitude, Longitude, and Time—current latitude, longitude, and time are displayed ifthe transceiver is connected to a GPS device. If the transceiver is not connected to a GPSdevice, you can manually enter the position and the time that you entered the position data.Speed Over Ground (SOG)/Course Over Ground (COG)—current SOG or COG isdisplayed if the transceiver is connected to a GPS device.Soft keys—used to select items. The function of these keys changes depending on what youare doing.System-status icons—see the following table.RX Squelch level isbroken by receptionof an incoming signalTX Transmitting W25 Transmitting at25 watts1W Transmitting at1 wattSaved channel LOCAL Receiver modefor areas with radiofrequency interference(such as harbors)ATIS ATIS enabled Position trackingenabledAuto channelchanging disabledIncoming or missedDSC callWeather alert External GPSconnected