Garmin XM GDL 69 Activation Instructions

Also see for GDL 69: Pilot's guide addendum Pilot's guide addendum Activation Instructions Pilot's guide Pilot's guide addendum

Garmin XM GDL 69 Activation Instructions Manual pdf 20 page image

Figure 4-2. Data Link Status Page5. Refer to X Table 4-1X to read the SAT ID/CONNECTIVITY information.6. Verify radio IDs and signal quality is between 2 – 3. If signal quality is zero, check the antenna andwiring.Table 4-1. Data Link StatusSAT ID Field‘- -‘ GDL 69/69A – 430/530 Series interface communications not yet established.‘XM’ GDL 69/69A not yet communicating with internal satellite radio hardware (normalduring power-up).‘X0’, ‘X1’, ‘X2’, or ‘X3’ ‘X’ = Satellite radio service activated. Satellite signal quality is indicated by thenumbers 0, 1, 2, or 3; where 0=none, 1=poor, 2=good, and 3=excellent.‘-0’, ‘-1’, ‘-2’, or ‘-3’ ‘-’ = Satellite radio service is not activated. Satellite signal quality is indicated bythe numbers 0, 1, 2, or 3; where 0=none, 1=poor, 2=good, and 3=excellent.Connectivity Field“Searching...” No satellite is currently in view, signal quality is ‘0’.“Satellite in view” Indicates a signal quality between 1 and 3.4.3 1 9 B Verify XM Subscribed ServicesThe 430/530 supports the following weather services: NEXRAD, graphical METAR, text-based METAR,Wind, and Graphical Temperature/Dew Point. These services are available only in the United States.Verify included services by displaying them on the unit, if applicable. If signal quality is between 1 and3, but no data is displayed, contact XM Satellite Radio to verify subscription. Be sure that the unit isupdated with the most current software.Page 14 XM Activation Procedures190-00355-04 Rev. H