Garmin Zumo 500 Quick Reference Manual

Also see for Zumo 500: Installation instructions Owner's manual Installation sheet Owner's manual Installation sheet

Contents

Looking at Your zūmoA Power buttonB Zoom in, raise volume, or increasebrightness.C Zoom out, lower volume, ordecrease brightness.D Page button—scroll through theMap, Compass, Trip Information, MediaPlayer, and Phone Menu pages. Press andhold to adjust brightness.E Speak button—press to adjustvolume level. Press and hold to announcevoice directions.Part Number 190-00697-01 Rev. CMarch 2007 Printed in Taiwan© 2006–2007 Garmin Ltd. or its subsidiariesGarmin® is a trademark of Garmin Ltd. or itssubsidiaries, registered in the USA and othercountries. zūmo™ is a trademark of GarminLtd. or its subsidiaries. These trademarks maynot be used without the express permissionof Garmin.The Bluetooth® word mark and logos areowned by the Bluetooth SIG, Inc., and any useof such name by Garmin is under license.For the latest free software updates (excludingmap data) throughout the life of your Garminproducts, visit the Garmin Web site atwww.garmin.com.SD cardslotMini-USB port for AC cable,USB Mass Storage mode,and updating softwareABCDEImportantInformationWARNING: This product contains alithium-ion battery. See the ImportantSafety and Product Information guide inthe product box for important battery safetyinformation.WARNING: When your zūmo is not in themotorcycle mount, use the weather cap toprevent damage to the connector.CAUTION: To prevent damage to thetouch screen, do not place sharp objects inthe carrying case pocket.TIP: Fold and keep this guide in yourcarrying case pocket.SpecificationsWater resistance: IPX7 waterproof(submersible in 1 meter of water for up to30 minutes)Power: Vehicle power cable, AC cableBattery: Rechargeable, replaceable lithium-ion battery.Battery life: Fully charged, up to 4 hoursFor more information, see the owner’smanual on disk. See the Important Safetyand Product Information guide in theproduct box for product warnings andimportant information.Configuring Your zūmoTo turn on your zūmo, press and holdthe Power button. Follow theon-screen instructions.Acquiring SatellitesGo outdoors to an open area, awayfrom tall buildings and trees. Turn onthe zūmo. Acquiring satellite signalsmay take a few minutes.bars indicate GPS satellitestrength. When the bars are green, yourzūmo has acquired satellite signals, andyou can start navigating.Charging the BatteryTo charge your zūmo, connect it to apower source using the vehicle powercable or AC cable.Calibrating the TouchScreenIf the touch screen is not respondingproperly, calibrate the touch screen.Turn the unit off. Press and hold thePower button for about one minuteuntil the Calibration screen appears.Follow the on-screen instructions.Resetting Your zūmoIf your unit freezes up, press and holdthe Power button and press .500/550zumo™the personal motorcycle navigatorQuick Reference Guide

/ 2

Related manuals for Garmin Zumo 500