Garmin Zumo 590 Owner's Manual

2 Install the Pandora app.See the owner's manual for your smartphone or mobile mediadevice for more information.Using PandoraBefore you can use the Pandora service, you must pair yourcompatible smartphone with your device (Pairing Your Phone).1 On your device, select Apps > Pandora®.2 Connect your compatible smartphone to your device.3 Launch the Pandora application on your smartphone.4 On your zūmo device, select an option:• To play a song, select .• To pause a song, select .• To skip a song, select .• If you like a song, select to hear more songs like it.• If you dislike a song, select to prevent it from beingplayed in the future.Changing Stations1 Select Apps > Pandora®.2 Select .3 Select a station.TracksA track is a recording of your path. The track log containsinformation about the recorded path, including time, location,and elevation information.Viewing Track Information1 Select Apps > Tracks > Active.2 Select a track.The track is displayed on the map.3 Select .4 Select an option:• To save the track, select Save Track.• To save the track as a trip, select Save as Trip.• To view an elevation plot of the track, select ElevationProfile.TracBack®Following Your Recent TrackThe TracBack feature records a track of your recent movement.You can retrace your recent track back to where you started.1 Select Apps > TracBack.Your recent track appears on the map.2 Select Go!.Saving Your Recent Track as a TripYou can save your recent track as a trip, which you cannavigate later using the trip planner (Navigating to a SavedTrip).1 Select TracBack.Your recent track appears on the map.2 Select > Save as Trip.3 Enter a name, and select Done.Tire PressureWARNINGUse of the Tire Pressure Monitor System is not a substitute forproper tire maintenance, and it is the driver's responsibility tomaintain correct tire pressure, even if under-inflation has notreached the level to trigger the low tire pressure alert. Failure tomaintain proper tire pressure can result in loss of control of thevehicle, which may lead to serious personal injury or death.The Garmin Tire Pressure Monitor System is available as aseparate accessory. The tire pressure feature is not compatiblewith all zūmo models. Go to www.garmin.com/zumo foraccessory and compatibility information.Setting Up the Tire Pressure SensorsBefore you can set up the tire pressure sensors, you must havethe battery and the numerical stickers included witheach sensor. You also must have a compatible zūmo device.The sensors communicate wirelessly with your compatiblezūmo device. You can monitor tire pressure and receive low-pressure alerts on your zūmo device.1 Remove the cap À from the sensor Á by rotating the capcounter-clockwise.2 If you have already installed the battery in the sensor,remove the battery.3 On your zūmo device, select Apps > Tire Pressure.4 Select a vehicle profile that matches the tire configuration ofyour vehicle.5 Bring the sensor close to the zūmo device.6 On your zūmo device, select the number next to the tire towhich the sensor will be paired.7 Within 30 seconds, on the sensor, insert the battery Â intothe battery holder Ã with the positive side facing up.The zūmo device searches for the sensor and displays aconfirmation message when the sensor pairs successfully.TIP: If the sensor does not pair successfully, you shouldremove the sensor battery, and repeat steps 6 and 7.8 Enter the recommended pressure for the tire.9 Enter the minimum pressure for the tire.The zūmo device triggers a low-pressure alert when thesensor reports a tire pressure reading lower than this value.10Replace and fully tighten the cap on the sensor.12 Using the Apps