Garmin aera 500 Series Pilot’s Guide190-01117-02 Rev. Aappendix d139Overview GPS Navigation Flight Planning Hazard Avoidance Additional Features Appendices IndexCable ClampRemoving the yoke mount from the yoke shaft (or control arm):1) Disconnect the cable connectors from the aircraft.2) Loosen the clamp by turning the Clamp Adjustment Knob until the clampassembly can be easily removed from the yoke shaft or control arm.cONNectiNG tO a GarMiN vhF cOMM radiOThe aera can also output frequency data to a Garmin aviation radio. Currently thetwo models supported are the SL30 nav/comm and the SL40 comm.NOte:For additional information refer to the SL30 nav/comm or the SL40comm installation manual.cautiON: This interface does not have an FAA installation airworthinessapproval. If any abnormalities with SL 30/40 tuning or operation areencountered, disconnect the aera from the SL 30/40 tuning interface.Output frequency data to an Sl40/Sl30 nav/comm radio:1) Connect the aera to an SL30/SL40 using the Aviation Bare Wire Connector(optional accessory).
