29ReferenceRoute PageCreating and Using a RouteRoute navigation allows you to create a sequence ofintermediate waypoints which lead you to your finaldestination. The eMap will store fifty routes, each with up tofifty waypoints. A Route can be created and modified fromthe Route Page or complex routes can be created on a PC andtransferred into the eMap.To create a route by entering eachwaypoint:1. Access the ‘Routes’ page from the Main Menu. Thepage has a ‘New’ button, a list of routes, and thenumber of unused route spaces.2. Highlight the ‘New’ field and press the ENTER keyto open a new ‘Route’ page. The name field willstate “Empty”.3. Press the MENU key to pop-up the options menu.With ‘Add Waypoint’ highlighted, press the ENTERkey to display the ‘Find’ menu. All categories can beused to create a waypoint on the ‘Route’ list.4. Use the Find menu to locate and display theInformation page for an item. Highlight the ‘OK’button and press the ENTER key to add it to the route.5. Repeat steps 3 and 4 to continue adding waypointsto your route until completed.To navigate the route:1. When you have finished adding waypoints to theRoute, press the MENU key to pop-up the routeoptions menu.2. Select ‘Start Navigation’ and press the ENTER key.The Map Page is displayed with the direction to go to thefirst waypoint on the route and the distance to the firstwaypoint displayed above the map.When you begin to move, the “Direction To Go” messagewill be changed to a direction arrow.A route line on the map connects all of the routewaypoints. Travel to each waypoint on the route using thepointer and route line for guidance.When the route direction changes, an “Approaching Turn”message will appear. You will notice that the route line doesnot follow the roads on the map but from waypoint to waypoint.To make the route to approximate the roads, placewaypoints at major turns along the roads (cities, intersections, etc.).Route Displayed on Map PageSelect Waypoints, Cities,Exits, Points of Interest,Addresses and Intersections tobuild your route.Route Page with a namedRoute, list of waypoints, andcities. When navigating aRoute, the Distance and ETA(arrival time) will display atthe bottom of the page.