Garmin eTrex H Owner's Manual

Also see for eTrex eTrex: Declaration of conformity Quick start guide Owner's manual Quick start guide

Garmin eTrex H Owner's Manual Manual pdf 20 page image

eTrex H Owner’s ManualM aIn MenuEditing a RouteTo insert a waypoint into a route:1. Press PAGE and switch to the Menu page.Select ROUTES > ENTER.2 Select a route > ENTER.3 Select the waypoint you want to insert a newwaypoint in front of > ENTER. The Insert/Remove window appears. Select INSERT >ENTER.4. Select a waypoint > ENTER.To remove a waypoint from a route:1. Press PAGE and switch to the Menu page.Select ROUTES > ENTER. Select a route >ENTER.2 Select the waypoint you want to remove. SelectREMOVE > ENTER.To delete a route:1. From the Menu page. Select ROUTES >ENTER. Select the route > ENTER.2. Select DELETE > ENTER. The confirmationwindow appears asking you if you really want todelete the route. Select YES > ENTER.Tracks PageThe eTrex draws an electronic Track Log on theMap page as you travel. The Track Log containsinformation about each point it plots, including timeand position. Review the saved Track Log on the map,turn recording on or off, and change the way tracksare recorded.The Track Log starts recording as soon as the unitgets a location fix. Save the current Track Log andclear it before you start traveling. The percentage ofmemory used by the current Track Log is displayedat the top of the Tracks page. When the display shows99%, it starts overwriting the beginning track points,you should save the Track Log before it reaches 99%of memory usage.After a Track Log is saved, the saved track will have aBEGIN and ENd point. You can save 10 Track Logs.To save the current Track Log:1. From the Menu page, select TRACKS >ENTER.