Garmin eTrex HC series Owner's Manual

Also see for eTrex Summit HC: Safety and product information Quick start guide Quick start guide Declaration of conformity

Garmin eTrex HC series Owner's Manual Manual pdf 14 page image

0 eTrex HC series Owner’s ManualBaSIc operatIonTo clear one or all proximity waypointsfrom the list:To remove a single entry, press ENTER. Toremove all waypoints from the list, press MENU> Remove �ll.To set proximity alarm tones:1. Select Proximity �larm Tones (eTrex HCxunits only). The tone for alarms on the eTrexHC units is pre-set.2. Use the setup page on HCx units to assigntones to the types of alarms listed. Speed Alertsare obtained by using POI Loader.(see page 16).3. When you trigger an alarm, a tone sounds anda “Near Proximity Point” message appears.When outside the set radius, a “LeavingProximity Point” message is shown.To turn proximity alarms on or off:Press MENU twice > Proximity (eTrex HCxand HC units) > Proximity �larm Tones (eTrexHCx units) and check or uncheck the Proximity�larms box.Using the Find MenuFind Menu with optionalMapSource dataUse the Find Menu to search for waypoints,geocaches, cities, and exits in the eTrex basemap.Additional icons appear depending on the optionalMapSource data loaded to the unit. Press and hold theFIND key to open the Find Menu.When you access a Find group list, it contains itemsnear your current location or the map pointer.The options menu for each category contains searchoptions. Select a Category.