Garmin eTrex eTrex Owner's Manual

Also see for eTrex - Hiking GPS Receiver: Features Owner's manual Manual Quick start guide Owner's manual

Garmin eTrex eTrex Owner's Manual Manual pdf 17 page image

15To change the waypoint name:1. On the ‘MARK WAYPOINT’ Page, press the UP orDOWN Button to highlight the Waypoint Name‘001’.2. Press ENTER. The ‘EDIT WAYPOINT NAME’ Pageappears.3. Press ENTER. Using the UP or DOWN Button, scrollthrough the letter selections. Select ‘H’ and pressENTER. Repeat this process and fi nish the word‘HOME’.4. Press the UP or DOWN Button to highlight the ‘OK’fi eld and press ENTER. The ‘MARK WAYPOINT’Page appears.5. Press the UP or DOWN Button to highlight the‘OK’ fi eld and press ENTER. Your location, named‘HOME’, is now marked and stored in memory.Now that you’ve marked your location, it’s time to gofor a brisk walk. Press the PAGE Button and switch tothe Map Page.Walk in a straight line for 3-4 minutes at afast pace and watch the Map Page.Your location is shown by the figure in the middle ofthe screen. As you move, watch the animated figure walk,and a line—called a “track”—appear along the path youhave just covered.Now take a sharp right turn and walk at abrisk pace for another 3-4 minutes.You can see your change in direction displayed on theMap .You can create or edit awaypoint on the ‘EDITLOCATION’ Page. Fromthe ‘MARK WAYPOINT’Page, highlight the Posi-tion Coordinates fieldand press ENTER. Thenfollow the on-screeninstructions.The ‘EDIT WAYPOINTNAME’ Page.NOTE: As a shortcut tip, press and holdENTER to mark a waypoint.Getting StartedEdit Waypoints)