Garmin iQue 3600 - Palm OS 5.0 150 MHz Application Manual

Also see for iQUE 3600: Features Application guide Operating instructions Setup guide Declaration of conformity

Contents

5iQue 3600GPS ApplicationsQueGPS OptionsTo use QueGPS options:1. Tap the QueGPS application tab or the Menu icon to display theOptions Menu.2. Observe the list of options:• Tap Preferences to display the GPS preference options.• When in 2D mode, tap New Elevation to reset the elevation.• Tap New Location when initializing the GPS Receiver if youhave moved over 600 miles from your last use location or if youhave not powered up the unit in over thirty days.To use QueGPS preferences:1. Tap the Preferences option to display the GPS Preferences Menu.2. Observe the list of options with check boxes:• Tap WAAS Enabled to enable the Wide Area AugmentationSystem operating mode. (See Additional Information aboutWAAS on page 57.)• Tap Battery Saver to change the rate at which the GPS receiveupdates your position data to conserve battery power. The GPSreceiver slows the frequency at which it calculates your locationand therefore requires less battery power with the result being aslight loss in position accuracy. The GPS is turned completely Offwhen the antenna is fully closed.You cannot operate in the WAAS and Battery Saver modes at thesame time. If you attempt to check both boxes, a message will displayand the last option checked will remain on after you tap the OK button.Set New ElevationSelect NewLocation forInitializationPreference SettingsQueGPS OptionsQueGPS Preferences Menu