Creating and Using a Flight Plan (Route)Use this method to create and save a flight plan, or route, that containsmultiple points or stops. Keep in mind that you must add your starting airportto your route; it is not added automatically.To create and use a flight plan (route):1. Press the Que button until you see theActive Route page.2. Highlight Add Wpt and press ENTER.3. Search for a point to add to your flightplan (see “Creating a Direct To” for moreinformation).4. Highlight a point; then press the Rocker keyRight to highlight OK and press ENTER.5. Repeat the previous three steps untilyou are finished adding points to yourflight plan.© Copyright 2004 Garmin Ltd. or its subsidiaries190-00426-02 Rev. B Printed in TaiwaniQue®3600aQuick Reference GuideCreating a Direct ToPress the Direct To D key to plot a direct course from your current location toany airport, navaid, or other aviation point.To go to an airport or navaid:1. Press the Direct To D key on the aviationcradle. The Go To page appears.2. To search by facility or by city, highlight theBy Identifier pick-list. Press ENTER.3. From the list that appears, highlight the searchmethod you want to use with the Rocker keyand press ENTER to select.4 Highlight the Name field and press ENTER.5. To change the name, highlight the first letterof the name and then press the Rocker key Upor Down to change the letter. Press the Rockerkey Right to move to the next letter. When youare finished changing the name, press ENTER.6. Go To is highlighted for you automatically. Toselect the point that appears in the list, pressENTER.7. If there are several points in the list, press theROCKER key Up and highlight the point youwant to select. Then press the ROCKER keyRight to highlight Go To and press ENTER.The iQue 3600a creates a Direct To from yourcurrent location to the point you selected.Finding Nearest Aviation PointsPress the NEAREST key to search for aviation points near your current locationand navigate to them quickly. You can search for airports, navaids, and other avia-tion points nearby.To find and go to an airport near yourcurrent location:1. Press the NEAREST key on the aviation cradle.The Nearest Airport page appears.2. Press the Rocker key Down to scroll throughthe list of airports near your current location.Highlight the point you want to go to.3. Press the Rocker key Right to highlightGo To and press ENTER. The iQue 3600acreates a Direct To from your current locationto the airport you selected.To find and go to an aviation point nearyour current location:1. Press the NEAREST key on the aviation cradle.2. Continue pressing the NEAREST key to searchfor other types of aviation points (shown in thepick-list to the right).3. Continue with steps two and three in theprocedure above. To jump to the NearestAirport page quickly, press and hold theNEAREST key.Choose a search methodfrom the pick-list.Enter the name withthe Rocker key.Highlight your destination.Add your starting airport to yourflight plan; then use the Add Wptbutton to add additional points.Search for points to add to yourflight plan and select OK after each.Press the NEAREST key repeatedlyto search for any type of aviationpoint listed above.Direct To D KeyNEAREST KeyMENU KeyESCAPE KeyENTER KeyRocker KeyQue ButtonUse these instructions as a reference for importantiQue 3600a functions. For more detailed instructions,please refer to the Que Applications Guide.Press to create a Direct To quickly.Press to find places near you.Press to open menus on a page.Press to exit menus or pages.Press to enter information.Press to highlight items on apage and pan across the map.Press to open and cycle through Que applications.