Garmin nuvi 140 series Owner's Manual

Also see for nuvi 150 series: Owner's manual Owner's manual

Contents

Device and Privacy SettingsTo open the Device settings page, from the main menu, selectSettings > Device.About: Displays the software version number, the unit IDnumber, and information on several other software features.EULAs: Displays the end-user license agreements that apply toyour choice.NOTE: You need this information when you update thesystem software or purchase additional map data.Travel History: Allows the device to record information for themyTrends™, Where I’ve Been, and Trip Log features.Clear Travel History: Clears your travel history for themyTrends, Where I’ve Been, and Trip Log features.AppendixPower CablesYour device can be powered various ways.• Vehicle power cable• USB cable• AC adapter (optional accessory)Device CareNOTICEAvoid dropping your device.Do not store the device where prolonged exposure to extremetemperatures can occur, because it can cause permanentdamage.Never use a hard or sharp object to operate the touchscreen, ordamage may result.Cleaning the Outer CasingNOTICEAvoid chemical cleaners and solvents that can damage plasticcomponents.1 Clean the outer casing of the device (not the touchscreen)using a cloth dampened with a mild detergent solution.2 Wipe the device dry.Cleaning the Touchscreen1 Use a soft, clean, lint-free cloth.2 If necessary, lightly dampen the cloth with water.3 If using a dampened cloth, turn off the device and disconnectthe device from power.4 Gently wipe the screen with the cloth.Avoiding Theft• Remove the device and mount from sight when not in use.• Remove the residue left on the windshield by the suctioncup.• Do not keep your unit in the glove compartment.• Register your device at http://my.garmin.com.Erasing User DataNOTE: This process erases all items you have saved to thedevice.1 Turn the device on.2 Hold your finger on the lower-right corner of the screen untila message appears.3 Select Yes to erase all user data.All original settings are restored.Extending the Battery Life• Keep your device away from extreme temperatures.• Put the device in sleep mode (Entering and Exiting SleepMode).• Decrease the screen brightness (Display Settings).• Do not leave your device in direct sunlight.• Decrease the volume (Adjusting the Volume).• Shorten the display timeout time (Display Settings).Changing the Fuse in the Vehicle PowerCableNOTICEWhen replacing the fuse, do not lose any of the small piecesand make sure they are put back in the proper position. Thevehicle power cable does not work unless it is assembledcorrectly.If your device does not charge in your vehicle, you may need toreplace the fuse located at the tip of the vehicle adapter.1 Unscrew the end piece À.TIP: You may need to use a coin to remove the end piece.2 Remove the end piece, the silver tip Á, and the fuse Â.3 Install a 2 A fast-blow fuse.4 Place the silver tip in the end piece.5 Screw the end piece back into the vehicle power cable Ã.Mounting on Your DashboardNOTICEThe permanent mounting adhesive is extremely difficult toremove after it is installed.Use the mounting disk to mount your device to the dashboardand comply with certain state regulations. See www.garmin.comfor more information.1 Clean and dry the dashboard where you are placing the disk.2 Remove the backing from the adhesive on the bottom of thedisk.3 Place the disk on the dashboard.4 Remove the clear plastic cover from the top of the disk.5 Place the suction cup mount on top of the disk.6 Flip the lever down (toward the disk).Removing the Device from the MountTilt the device forward.Removing the Suction Cup from theWindshield1 Flip the lever on the suction cup toward you.2 Pull the tab on the suction cup toward you.Updating Maps and Software with GarminExpress™You can use Garmin Express software to download and installthe latest map and software updates for your device. Mapupdates provide the latest available mapping data to ensureyour device continues to calculate accurate and efficient routesAppendix 11