Getting Started 3Adjusting the Master Volume1 Select Volume.2 Select an option:• Use the slider bar to adjust the volume.• Select to mute the device.• Select and use the slider bars to adjustthe volume for navigation prompts, phone,and media.Status Bar IconsThe status bar is located at the top of the mainmenu. The status bar icons display informationabout features on the device. You can select someicons to change settings or to view additionalinformation.GPS signal status.Bluetooth ® technology status(appears when connected to acompatible device).Transportation mode indicator.Current time.Battery status.Satellite SignalsAfter the device is turned on, it begins acquiringsatellite signals. The device may need a clearview of the sky to acquire satellite signals. Whenat least one of the bars is green, your devicehas acquired satellite signals.Viewing GPS Satellite SignalsFor more information about GPS, go towww.garmin.com/aboutGPS.Hold for 10 seconds.Transportation ModesAutomobile modePedestrian modeRouting and navigation are calculated differentlybased on your transportation mode.For example, in Automobile mode, the estimatedtime of arrival is calculated using the speed limit ofthe roads on the route.NOTE: Pedestrian routes do not includehighways. If you have cityXplorer ™ maps loadedon your device, pedestrian routes may includepublic transitChoosing a Transportation ModeSelect .Battery InformationAfter the device is connected to power, it beginsto charge.in the status bar indicates the status of theinternal battery. To increase the accuracy of thebattery gauge, you should fully discharge thebattery and then fully charge it. Do not unplug thedevice until it is fully charged.