Garmin © 2005 55 nüvi Owner’s ManualAPPENDIXUSB Interface TroubleshootingProblem/Question Solution/AnswerHow do I know my nüviis in USB Mass StorageMode?When your nüvi is in USB Mass Storage Mode, a picture of a nüviconnected to a computer is shown. Also, you should see a newRemovable Disk Drive listed in My Computer.My computer neversenses that the nüvi isconnected.1. Unplug the USB cable from your computer.2. Turn the nüvi off and then back on again.3. Plug the USB cable into your computer. The nüvi automaticallyturns on and goes into USB Mass Storage Mode.I cannot find any drivesnamed “nuvi” in my listof drives.Try the solution listed above.If you have several network drives mapped on your computer,Windows may have trouble assigning drive letters to your nüvi drives.Follow the steps on the following page to assign your drive letters.I keep getting a messagesaying “Unsafe Removalof Device” when I unplugthe USB cable.When you are ready to disconnect your nüvi from your computer,double-click the Unplug or Eject icon in your system tray. Select“USB Mass Storage Device” and click Stop. Select the nüvi drives andclick OK. You can disconnect your nüvi from your computer now.How can I rename mynüvi drives?1. Open My Computer.2. Select the drive you want to rename.3. Right-click your mouse and select Rename.4. Type the new name and press the Return key.