nüvi 310/360 Owner’s ManualGettInG startedMounting the nüvi on the WindshieldCheck your state and local traffic laws before mounting. Currently, state laws in California and Minnesota prohibitdrivers from using suction mounts on their windshields while operating motor vehicles. Other Garmin dashboard orfriction mounting options should be used.If you want to mount the nüvi on your dashboard instead, see page 52.To mount the nüvi using the suction cup mount:1. Plug the power cable into the back of the mount. Plug the other end into a12/24-Volt receptacle in your vehicle.2. Clean and dry your windshield and the suction cup with a lint-free cloth. Placethe suction cup on the windshield.3. Flip the lever back, toward the windshield.4. Flip up the GPS antenna. Fit the bottom of your nüvi into the cradle.5. Tilt the nüvi back until it snaps into place.➌➋➊➍➎MicrophonejackWindshieldIf you use an external microphone (optional), plug it into the right side of the cradle.To remove your nüvi from the cradle, press the small tab on the bottom of the cradleup, and tilt the nüvi forward.
