Garmin zumo 590 Owner's Manual

Also see for Zumo 590: Installation instructions Owner's manual Quick start manual Installation instructions

the mount and base plate, and make sure that no part of thedevice or mount touches the motorcycle.1 Thread the M4 x 20 mm panhead screws À through thewashers Á, cradle, spacers Â, and base plate Ã.2 Tighten the nuts to secure the base plate.Attaching the Base Plate to the Handlebar Base1 Align the ball of the handlebar base À and the ball of thebase plate Á with each end of the double-socket arm Â.2 Insert each ball into the double-socket arm.3 Tighten the knob slightly.4 Adjust for optimal viewing and operation.5 Tighten the knob to secure the mount.Installing Your Device in the Motorcycle Mount1 Fit the bottom of your device into the cradle.2 Tilt the device back until it snaps into place.3 If the latch on top of the mount stays up after you insert thedevice, press it down.Mounting Your Device in an AutomobileNOTICEBefore mounting the device, check the local laws pertaining towindshield mounting.WARNINGThis product contains a lithium-ion battery. To prevent thepossibility of personal injury or product damage caused bybattery exposure to extreme heat, store the device out of directsunlight.Do not use the suction cup mount on a motorcycle.See the Important Safety and Product Information guide in theproduct box for product warnings and other importantinformation.1 Plug the automotive power cable À into the connector Á onthe mount.2 Remove the clear plastic from the suction cup.3 Clean and dry your windshield and the suction cup with a lint-free cloth.4 Press the suction cup Â to the windshield, and flip the leverÃ back toward the windshield.5 Snap the cradle Ä onto the suction cup arm.6 Fit the bottom of your device into the cradle.7 Tilt the device back until it snaps into place.8 Plug the other end of the automotive power cable into apower outlet.Removing Your Device from the MotorcycleMount1 Press the release button on the side of the mount.2 Lift out the device.Support and UpdatesGarmin Express™ provides easy access to these services forGarmin devices. Some services may not be available for yourdevice.• Product registration• Product manuals• Software updates• Map, chart, or course updates• Vehicles, voices, and other extrasSetting Up Garmin Express1 Connect the device to your computer using a USB cable.2 Go to www.garmin.com/express.3 Follow the on-screen instructions.Updating Maps and Software with Garmin ExpressYou can use Garmin Express software to download and installthe latest map and software updates for your device. Mapupdates provide the latest available mapping data to ensureyour device continues to calculate accurate and efficient routes2 Getting Started