Garmin zumo 665LM Installation Instructions Manual

Also see for Road Tech Zumo 665: Product information Owner's manual Quick start manual User guide Owner's manual

zūmo 665 Installation Instructions WarnIngIncorrectly wiring the power cable with bare wire leads can result in damage to the vehicle orthe battery and can cause bodily injury. Garmin strongly recommends having an experiencedinstaller with the proper knowledge of electrical systems install the unit.See the Important Safety and Product Information guide in the product box for productwarnings and other important information.Do not use the suction cup mount on a motorcycle.Step 1: Connecting Power to the MountSelect a suitable and secure location to mount the zūmo on your motorcycle, based onavailable power sources and safe cable routing.Cradle Headphone/audio out jack (3.5 mm)Microphone jack (2.5 mm) Mini-USB connector(for GXM 40 Antenna)Bare wires withinline fuse forpower connectionPower cableStep 2: Installing the Handlebar BasenoticeThe recommended torque is 50 lbf-in. Do not exceed torque of 80 lbf-in.The zūmo includes parts for two handlebar installation solutions. Custom mounts can requireadditional hardware (www.ram-mount.com).Option a: Installing the U-bolt and Handlebar Base:1. Place the U-bolt around the handlebar, and thread the ends through the handlebar base.2. Tighten the nuts to secure the base. Do not overtighten.HandlebarbaseHandlebarU-bolt

/ 4

Related manuals for Garmin Road Tech Zumo 665