32 33 EnglishEnglish7.2 LevellingIf the bearing surface is uneven the appliance can be balanced with thefront feet. Turn the foot (34) until the appliance stands firmly on theground horizontally and without wobbling.8 Start-up8.1 Before starting up for the first timeAfter transportation the appliance should be left to stand for at least24 hours so that the refrigerant can collect in the compressor. Non-observance of this may damage the compressor and so lead to theappliance malfunctioning. In such a case the guarantee becomes invalid.Clean the interior of the refrigerator and all of the accessories to befound here with commercially available, mild cleaning products.8.2 connecting the appliance to the mains supplyIMPoRTAnTIt is imperative that the appliance be earthed according tothe directions. For this purpose the plug of the connectingcable is provided with the appropriate contact.IMPoRTAnTCall a specialist electrician if the plug does not fit into thesocket. Do not try to force the plug into the socket.IMPoRTAnTIf you disconnect the appliance from the mains supply, orif a power cut occurs: wait for 5 minutes before you restartthe appliance.9 operation9.1 Switching the appliance onIn order to switch on the appliance push the mains plug into the socket.9.2 Setting the temperatureThe temperature can be adjusted from 0°C to 10°C. Adjustment isby pushing the UP (warmer) and DOWN (cooler) buttons. Whenthe compressor operates, the COOLING lamp illuminates, when thecompressor stops, the COLD lamp illuminates.Within the cooler, there are three levels with different temperatures.Thus it is possible, e.g. to store both red and white wine in thecooler simultaneously.34UpDown°CColdCooling