Gastroback 40126 Design Juicer Pro Instructions For Use And Recipes

DISASSEmBlING YOUR DESIGN JUICERwARNING: Always turn the applianceoff and pull the plug when the applianceis not in use or when disassembling,moving or cleaning the appliance. Neverlet water or other liquids run into the motorblock. Never clean the power cord or themotor block in the dishwasher, pour liquidsover the appliance or douse or dip it inwater or other liquids.Step 1:Push the ›oN/oFF‹ button on the juicerto ›oFF‹ and then switch off at the poweroutlet and unplug.ImPORTANT: Wait for the filter basketto stop spinning before continuing to step2 carefully remove the pulp container bytilting the pulp container slightly to the rightand unlatch it from under the juicer coverand the container support extending fromunder the motor base (picture 1).Step 2:Pull the locking arm back over the grooveson both side of the juicer cover (picture2/3). Move the locking arm down.Step 3:Lift the juicer cover off the juicer (picture 4).123446