59Food Preparation & Usage FunctionDried fruit Chopped dry fruitUse: fruit minceIce CrushIce CrushUse: mixed drinks and cocktailsIce CrushCaRE aND ClEaNiNgwaRNiNg: To avoid injury to persons and damage, always turn the appliance off, waitfor the motor to stop completely and unplug the appliance, immediately after operation andbefore assembling/disassembling or cleaning the appliance.waRNiNg: Ware apropriate gloves if processing hot food. Ensure not to get burned onspilled over liquids or steam.attENtioN: Do not use abrasive cleaners, cleaning pads, corrosive chemicals (disinfectants,bleach) or any sharp or hard objects (i.e. metal scouring pads) for cleaning, for this coulddamage the surfaces. Always handle the entire appliance with care and without violence.Cleaning the blender jug1. Empty the blender jug and rise it with warm water.2. Place the blender jug on the motor blockand ensure it is securely locked into position.3. Fill the blender jug with 1 litre of warm soapy water (max. 60°C). The knife should becovered with water. Close the blender jug with the lid. Turn the appliance on using the Intervalprogram. Let the motor run.4. Turn the appliance off by turning the rotary switch to position ›0‹ (all buttons illuminationswill go out), wait for the blade to stop moving, pull the plug out of the power outlet andremove the blender jug off the motorblock.5. Take the lid off the blender jug and pour out the water. Stubborn residues you can removeusing a nylon washing brush or sponge.6. Clean the lid and the inner lid with warm soapy water.7. Rinse the blender jug, lid, and inner lid with clear water and dry the parts thoroughly and care-fully with a cloth or leave all parts dry naturally where they are out of reach of young children.Note: The blender jug, lid, inner lid, blade assembly housing and silicon seal are dishwashersafe. The lid, inner lid, blade assembly housing may be washed in the dishwasher in the topshelf only on a standard wash. The blender jug may be placed in the bottom shelf. Max. 60°C.waRNiNg: Pay attention not to cut yourself cleaning around the blade or cleaning the blade.imPoRtaNt: The blender jug should be clean now. For the case that there are stubborn resi-dues on the blender jug or the blade, disassemble the blender jug and clean the single part(see ›Assembling and disassembling the appliance‹). Soak the parts in warm soapy water.