Gastroback Design Crepe Maker Pro Operating Instructions Manual

Contents

Gastroback Design Crepe Maker Pro Operating Instructions Manual Manual pdf 36 page image

36over. To do this, slide the spatula gently under the edge of the crêpe, turn your wristand lift up the crêpe confidently, then turn it over onto the other side. For crêpes tobe served cold, cook the other side only slightly. For crepes to be filled, follow theinstructions in the recipe section. Wipe the heating plate and guide groove with thecloth, clean the spreader with the brush and put it in the tray of water.WARNING! The appliance is very hot during operation. Pay attention not totouch the appliance while it is hot.WARNING! Never cut on or try to scrape off batter from the heating surfaceusing hard, sharp-edged items. This would damage the non-stick coating.TIPS FOR BEST RESULTSAlways spread out the batter with the batter spreader clockwise, never turn the batterspreader the other way around.If required, apply gentle pressure to the batter spreader on the hot plate when rota-ting it.Always make sure the batter has no lumps, sieve it if required.To reheat crêpes, use thermostat position 3.Certain ready-made batters are not designed to be spread out with the batter sprea-der.To ensure the non-stick coating of the hot plate has a long life expectancy, do notovergrease it and only use wooden or plastic accessories.For especially airy and crispy crêpes add 50 ml of sparkling water to the batter.Reduce the ammount of milk accordingly.Let the batter swell for approx 30 min to 1 hour before baking.CARE AND CLEANINGAlways ensure that the appliance is switched off. Then remove the plug from thepower outlet before cleaning and storing the appliance.WARNING! Allow the appliance to cool down, before cleaning or moving theappliance. Do not place the appliance or power cord in an automatic dishwasher.Do not immerse the appliance or power cord in any liquids or spill any liquids onthem. Always wipe off spilled liquids immediately. Do not pour or drip any liquidson the motor housing or power cord. Do not place the appliance on wet or dampsurfaces. When liquids are spilled on the motor housing, immediately unplug theappliance and dry the motor housing to avoid risk of electric shock or fire.