Gecko Switch Quick Start Up Manual
Gecko SwitchQuick Start Guide1on/off with night lightDimmer ButtonDip For Finger To Open ButtonUsing Your Switch2Download our APP for FREEGecko Switch InstallationGecko switch & AAA alkaline battery x 2(come with the box)AAAAAAUse your smartphone to turn on/off oradjust brightness using the dimmer,if applicable, of your light.”Inserting AAA batteries.13Move your finger to the semi-circle shaped dip at the bottom of the press button. Use your nail toforce open the press button by pulling upwards and out.Inserting two new Alkaline AAA batteries into the recess behind the main switch button of theGecko Switch. The LED indicator at bottom of Gecko Switch will light up with power.Reattach the main switch button.AAA batteriesAAAAAA3 Steps.3 Stick the Gecko Switch anywhere you wantGecko GlueGecko Glue2 Linking to the Base Switch (optional)If you buy the Gecko switch with a Base Switch in the same package, they are already linked by defaultat the factory, so there is no need to manually link these switches. If you bought the Base Switch andGecko Switch separately or somehow the link was broken, they can be linked manually by holdingBOTH the main switch button and the “+” button for 3 seconds to enter pairing mode for both switches.A long beep will sound when successfully linked.3 seconds SimultaneouslyGeckoBase4Remove peel of the Gecko Glue at the back of the Gecko Switch. Then put it anywhere you like.To change location of the Gecko Switch, remove it very, very slowly. Then put it somewhere else.The glue pad can be removed and reused over and over again. Try it!HINTThe Gecko Glue canbe washed with water toregain its stickiness.Technical Assistancehelp@xmtlab.com w w w. geckoswitch.comFCCThe device is approved by the FCC and it complies with Part 15 of the FCC rules. Its operation issubject to the following two conditions:1. This device may not cause harmful interference.2. This device must accept any interference that may cause undesired operation.WARNINGChanges or modifications to this unit not expressly approved by the party responsible ofcompliance could void the user’s authority to operate the equipment.5LED flashes redSymptomCannot turn on/off the lightPossible CauseBattery deadLink to Base Switch broken. Manually relink.Battery lowTroubleshootingSpecificationsBattery: Two Alkaline AAA batteriesBluetooth: Bluetooth 4.0Operating ambient temperature: 32° to 95° F (0° to 35° C)Relative humidity: 5% to 95% noncondensingWarrantyIf, within one year from date of purchase, this product should become defective(except battery and glue), due to faulty workmanship or materials, it will be repaired or replaced,without charge. Proof of purchase and a Return Authorization are required.If you have any questions about the installation or operation of this product, please contact us at: |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine