Gecko in.mix 300 Series Tech Book

Contents

Gecko in.mix 300 Series Tech Book Manual pdf 10 page image

9PreparationConnectionsRemove the cover screws from the front of the apparatus with a Phillips screw driverBefore closing, please make sure the in.mix 300 gasket is well in place.To prevent electric shock hazard, do not connect to main power supply while the cover is removed.Pin Function1 BLUE (switched ground)2 GREEN (switched ground)3 RED (switched ground)4 VccThe inmix 300 powers the LEDs with DC current**No matter the quantity of LEDs or their placement(Out 1 to Out 4), a maximum of 16A can be suppliedby the inmix 300 Every color (red, green or blue) is1 1 12 2 23 3 34 4 4controlled independently through switching The currentlimiting resistors are not supplied, they must therefore bein the LEDs One must not connect a LED (or other light)directly to any zoneConnectors Out 2, Out 3 and Out 4 offer the following connections The switching transistors are on the inmix 300Remove all seals and insert LED wire Repeat for every LED lights you need to connectGasketConnector Out 1 offers the following connections For this output, the switching transistors are included with the LEDs,which is standard with “cluster” type modelsPin Function1 BLUE (TTL output, High=on)2 GREEN (TTL output, High=on)3 RED (TTL output, High = on)4 +12V5 OV1 2 3 4 5** The output voltage is switched to simulate the power of a5V output.