Geco GA03HA-01 User Manual
                                | |
Contents
| 
GA03HA-01 User Manual PPUH „GECO” Sp. z o.o.Page 13 Edition I Valid from 2017-07-26In automatic mode, changes to ‘daytime’ or ‘night time’ cycle temperatures are signalled by a clock sign on themain screen of the controller. The next time that work cycles are switched, the change ceases to be active andthe clock symbol disappears and the controller activates the chosen programme.6.2.3. Heating modeActivation of the heating mode is indicated by a light showing the corresponding temperature. Change theheating mode to the opposite of what is displayed on the controller and activate the programme by pressingthe buttons or . The change applies until the end of the next work cycle (to the change between‘daytime’ and ‘night time’, or vice versa).6.2.4. Daily settingsAccess to daily settings is possible by using the button and via the menu (1.1.2). Nine dailyprogrammes are available. The first two cannot be edited, but the remaining seven can be set by the useraccording to requirements.Use the buttons or to select the item for editing (programme number or „daytime” or„night time” temperature). The item for editing is then highlighted. To change the values of the selectedelement, press or .Move the time settings bar using the buttons or . The cursor moves through individual timeunits of 15 minutes, but the clock determines the exact position of the cursor. Editing takes into account thedivision between daytime and night time heating modes, and is activated by pressing or .Activation of the daytime heating mode for the selected time is indicated by lit horizontal bar for thecorresponding part of the screen, and activation of the night time mode is indicated by an absence of this bar.Confirm changes by pressing the button .Return to the previous level without activating changes by pressing the button . If daily settings wasentered via the main screen using the fast access key, the panel will return directly to the main screen.6.2.5. Weekly settingsCursor ClockCurrent time,indicated by thecursor |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine