12W A R N I N GIn order to avoid personal injury and the risk of fire and electric shock, remove the battery packbefore adjusting, inspecting, or cleaning the blower.CleaningRemove the battery pack.1. Brush or blow dust and debris out of the air vents using compressed air or a vacuum. Keepthe air vents free of obstructions, sawdust, and wood chips. Do not spray, wash, or immerse theair vents in water.2. Wipe off the housing and the plastic components using a moist, soft cloth. Do not use strongsolvents or detergents on the plastic housing or plastic components. Certain household cleanersmay cause damage, and may cause a shock hazard.Battery Pack• Store the battery pack fully charged.• Once the charging light turns green, remove the battery from the charger and disconnect thecharger from the outlet.• Do not store the battery pack on the tool.• After charging, the battery pack may be stored in the charger, as long as the charger is notplugged in.Charger Maintenance• Keep the charger clean and clear of debris. Do not allow foreign material to get into the re-cessed cavity or onto the contacts. Wipe the charger clean with a dry cloth. Do not use solventsor water, and do not place the charger in wet conditions.• Unplug the charger when there is no battery pack in it.• Fully charge the batteries before placing them in storage.• Store the charger at normal room temperature. Do not store it in excessive heat. Do not usethe charger in direct sunlight. Recharge at room temperature between 45˚F and 104˚F (7˚C and40˚C). If the battery pack is hot, allow it to cool down before recharging.MAINTENANCE