Gemini CDMP-1300 Operation Manual

Also see for CDMP-1300: Brochure & specs Catalog

Contents

Gemini CDMP-1300 Operation Manual Manual pdf 5 page image

CDMP-1300FUNCTIONS: (CONTINUED)12 BPM: Press and hold the BPM button to turn on the BPM read out, onceon you may TAP the button to the beat of the music, after a few TAPSthe display will read out the average BEATS PER MINUTE of the track.PGM: Allows you to create a set playlist. To program a set list into theCDMP-1300 memory, begin by stopping the unit from play and press-ing PGM to begin the set list. Select a track by using the track selectionbutton to scan to the first track to be placed in the set list.When you have selected the proper track press PGM and theCDMP-1300 will be ready to set your next selection. Repeat the previ-ous steps until you have completed your playlist, then press play tobegin the set list.PITCH: Pushing the PITCH button activates the PITCH CONTROL SLIDE.The PITCH button has three settings 8%, 12% and 24% and can betoggled by pressing the PITCH button once for each setting . Push thePITCH button again to deactivate this mode.PITCH CONTROL SLIDE: Moving the PITCH CONTROL SLIDEup or down will lower or raise the pitch percentage up to + or - 24%depending on the PITCH BUTTON setting.PITCH BEND: Pushing the PITCH BEND BUTTONS will automaticallybend the pitch up to +26% or bend the pitch down to -26% dependingon the setting of the PITCH BUTTON. Releasing the buttons will returnthe pitch to the original pitch setting. You can use this function to matchthe beat when mixing from one song to another.LOOP SECTION: A LOOP repeats the section between the entry point(IN) and the exit point (OUT). To set a loop while the unit is playing,start by pressing the IN BUTTON (it will light up) and when you reachthe desired end loop point press the OUT BUTTON (it will also light up).The loop will continue playing until you press the OUT BUTTON againallowing the music to continue from that point on, to re-engage the loopyou must press the RELOOP BUTTON. When you have released yourloop the OUT BUTTON will turn OFF and the IN BUTTON will remain litto indicate that your loop is stored in the CDMP-1300 memory. Pressingthe IN BUTTON again while the unit is playing will erase the previouslysaved loop while saving your new loop entry point. Press OUT to exitthe loop and save a new complete loop. Press RELOOP to return to thebeginning of the previously saved loop from normal play.NOTE: THE FIRST LOOP WILL HAVE A PAUSE AT THE EXIT POINT,WHILE ALL OTHERS WILL BE SEAMLESS.PLAY/PAUSE: Each press of the PLAY/PAUSE BUTTONcauses the operation to change from PLAY to PAUSE or from PAUSEback to PLAY. The PLAY/PAUSE BUTTON remains lit when in PLAYmode, while it blinks in PAUSE mode.CUE: While the unit is playing and after the cue point has beenprogrammed, pressing CUE will cause the CD player to enter thePAUSE mode (PLAY/PAUSE BUTTON blinks) at the programmed cuepoint (the CUE LED is lit). Holding down the CUE buttonchanges the function to preview , and allows you to stutter start or playfrom the programmed CUE POINT Releasing the CUE button will returnthe CD to the preset CUE point.REPEAT: Press the repeat button once to engage 1 or repeat theselected track. Press REPEAT again to engage ALL setting which willrepeat all the tracks on the CD. Press REPEAT again to disengage therepeat function.1314151617181920521 USB PORT The USB port allows the connection of any USB mass stor-age device*.USB/CD SELECT BUTTON The USB/CD select button allows you totoggle from the CDMP-1300 internal CD drive and the mass storagedevice connected to the USB port.TRACK SELECTION ROTARY: The TRACK SELECTION ROTARYallows you to navigate through folders or search through tracksdepending on weather you are in USB mode or CD mode.In CD mode the rotary can search through cd tracks, turning therotary to the right or clock-wise advances the selection, and turningthe rotary to the left or counterclock-wise decreases the selection.In USB mode the ROTARY knob allows you to search through foldersand navigate through music libraries on your USB device.TO CHOOSE A FOLDER: Press and hold the TRACK SELECTIONROTARY and turn it clockwise or counterclockwise to the folder youwish to search through, once you have found the disered folder,release the TRACK SELECTION ROTARY and the display will showthe first song in that folder. Once in a folder you can turn theTRACK SELECTION ROTARY to the song you wish to play and theCDMP-1300 will either automatically load the song when in singlemode or play the song when in continuous mode.NOTE : ONCE YOU HAVE SKIPPED TO ANOTHER TRACK, YOU MAY NOT GO BACK TO YOUR PRO-GRAMMED CUE POINT. YOU MUST BEGIN YOUR CUE SELECTION OVER AGAIN, THE CUEWILL BE PRESET TO THE BEGINNING OF THE NEWLY SELECTED TRACK.We recommend that you use a MASS STORAGE DEVICE that is nolarger than 2 gb and that only has less than 100 folders with lessthan 1000 songs in any one folder. larger drives will work but theywill greatly affect the time in which it takes to search and or load asong.SPECIFICATIONS:GENERAL:Type.........................................Compact Disc Player & USB Mp3 ReaderDisc Type...................................Standard Compact discs (12 cm & 8 cm)Time Display.....................Track Elapsed, Track Remain, or Total remainVariable Pitch............................................................................± 24% SliderPitch Bend............................................................................± 26% MaximumInstant Start....................................................................Within 0.03 secondsInstallation...........................................................................................19" eachDimensions........................... 19" x 3.5" x 10" (482.6 x 88.9 x 254 mm)Weight Per Unit................................................................... 5.5 lbs. (2.5 kg)AUDIO SECTION:Quantization......................................1 Bit Linear/Channel, 3 Beam LaserOversampling Rate..............................................................................8 TimesSampling Frequency.........................................................................44.1 kHzFrequency Response............................................................20 Hz to 20 kHzTotal Harmonic Distortion...................................................Less Than 0.05%Signal to Noise Ratio..............................................................................85 dBDynamic Range.......................................................................................85 dBChannel Separation.................................................................85 dB (1 KHz)Output Level...................................................................2.0 +/- 0.2V R.M.S.Power Supply......................................................AC 115/230V, 60/50 HzSPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE WITHOUT NOTICE FORPURPOSE OF IMPROVEMENT.2223*