Gemini GFP300A Manual
        | |
4Before the first use, please clean all the detachable parts such as press rod, squeeze tube, grindinghead, grinding cover and so on completely.1. Prepare your food, the main food is banana. You can also add some other soft fruits, such asapple, strawberry, mango etc. or almond, cookies to make your dessert with various tastes. Peelthe fruits off, and cut them into the suitable size.Caution: Do not add any hard food, it will block the appliance, even maybe damage the motor unit.Note: The fruit should remove the peel and pip before use, otherwise it will block the appliance.Note: Do not add any liquid food, it will outflow from the appliance directly.2. Put the chopped fruit into the freezer under the temperature of -18˚C for eight hours, after youtake it out, please put it under room temperature for about 12-15 minutes to make it soften.Note: If the banana pieces are over-frozen, you need to defrost them to make them besoftened, frozen-fruit that is too hard will block the appliance.3. Assemble all the accessories according to the section “ASSEMBLE AND DISASSEMBLE”.4. Plug in the appliance, then press the switch to “ON” position, when the appliance operatesnormally, put the fruit pieces into squeeze tube, then press the press rod to the lowest position.Note: Do not operate the unit for more than 1 minute continuously or the fruit weight cannot be morethan 0.5kg for each use.Note: During the operation, please do not take off the squeeze tube assembly from the motor unit.5. Place a clean container with proper size under grinding cover to receive food coming from theappliance.6. Press the switch to “OFF” position and unplug the power source after operation.ClEANING AND MAINTENANCEENVIRONMENT FRIENDlY DISPOSAl1. Unplug the power cord before cleaning.2. Disassemble all the accessories such as squeeze tube, grinding cover, grinding head,and press rod. Please clean all the accessories after each use.Caution: Ensure that the motor unit is unplugged when disassembling.3. Wipe the outside surface of the motor unit with a damp cloth, then dry it thoroughly.Note: Never immerse the motor unit in the water for cleaning.You can help protect the environment!Please remember to respect the local regulations: hand in the non-workingelectrical equipments to an appropriate waste disposal center.OPERATION |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine