Gemini PS-626USB Operation Manual

Also see for PS-626USB: Brochure & specs Product introduction

Contents

CONTROLS: (CONTINUED)FADER REPLACEMENT:SPECIFICATIONS:182021PS-626USB1. UNSCREW THE FADER (B)SCREWS. DO NOT TOUCH INSIDESCREWS (C) CAREFULLY RE-MOVE OLD CROSS FADER ANDUNPLUG CABLE (D)2. PLUG IN THE NEW CROSSFADER INTO CABLE (D) ANDPLACE BACK INTO MIXER.3. SCREW THE CROSS FADER TOMIXER WITH THE FADER PLATESCREWS (B)4. REPLACE THE FACE OF THE MIXER AND SCREW THE FOUR SCREWSBACK IN AND REPLACE THE FADER KNOBS.INPUTS:Phono............................................................................3mV,47 K OhmLine.........................................................................150 mV, 27 K OhmMIC.............................................................1.5 mV, 1 KOhm BalancedOUTPUTS:Max..........................................................................20V Peak-to PeakRec............................................................................225 mV, 5 K OhmGENERAL:Frequency Response.........................................20Hz - 20KHz +/- 2dBDistortion..................................................................................< 0.02%S/N Ratio...................................................................Better than 85 dBHeadphone impedance..............................................................8 OhmPower Source ..............................................................AC 15v 500mAUnit dimensions............................................................10” x 3.3” x 12”.............................................................................(254 x 84 x 304 mm)Weight.........................................................................6.5 lbs (2.94 kg)SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTIFICATION FOR IMPROVE-MENTCHANNEL ROTARY GAINThe CHANNEL ROTARY GAIN allows you to boost the signal of eachindividual channel depending on how low or high its input level is3 BAND EQUALIZERThe 3 BAND EQUALIZER adjust the tone of each CHANNEL by giv-ing you a choice 3 frequencies (BANDS) to adjust , from LOW,MIDRANGE (MID) and HIGH’s ,you can use the adjustment knobs tohigher or lower the 3 separate frequencies till the sound of the musicprogram is appropriate for your listening environment.CHANNEL VOLUME FADERAfter you have chosen which input you will use with the INPUT SE-LECTOR the corresponding CHANNEL FADER will allow you to ad-just the volume for that particular CHANNEL.FADER ADJUSTMENT SWITCHESThe fader adjustment switches allow you to change the functionalityof the fader. The REVERSE switch when in the ON position will flipthe fader so it works in REVERSE ie. channel (1) on the left and chan-nel (2) on the right. The CURVE selector lets you choose between twofader CURVE settings, positioning the switch to the left will give you agradual CROSSFADE and positioning the switch to the right will giveyou a quick CROSSFADE.CROSS FADERThe CROSS FADER allows you to mix evenly from one source to an-other. On the PS-626USB The CROSS FADER is assignable betweenall (5) channels. The CROSS FADER on the PS-626USB is also re-movable and if the need arises can be replaced.The RG-45 (RAIL-GLIDE™) DUAL-RAIL CROSS FADER, which has internal dualstainless steel rails that allow the slider to ride smoothly and accu-rately from end to end can be purchased from your local GEMINIdealer.NOTE: WHEN USING THE CROSS FADER LIGHTLY GLIDE THEFADER BACK AND FORTH. PRESSING DOWN ON THE CON-TROLS CAN BEND CONTACTS AND CAUSE A LOSS OF SOUND.VU METERThe PS-626USB has a VU METER that allows you to monitor thedecibel levels of the LEFT and RIGHT MASTER output.CUE MASTER SWITCHThe VU METER has two display modes, in CUE mode it will displaythe level of the channel you are cueing, in MASTER mode it displaysthe main MASTER output.MASTER VOLUME ROTARYThe MASTER VOLUME ROTARY knob adjust the volume of theMAIN outputCUE/PGM ROTARYThe CUE/PGM ROTARY determines the mix between the chosenCHANNEL CUE SELECTOR and the MAIN OUTPUT mix.CUE VOLUME ROTARY KNOBThe CUE VOLUME ROTARY KNOB adjusts your HEADPHONEMONITOR OUTPUT’S volume.CHANNEL CUE SELECTORThe CHANNEL CUE SELECTOR allows you to choose which chan-nel you wish to monitor in your headphones.51314USB SETUP:ON A PCOpen the START menu and go to CONTROL PANEL, once in thecontrol panel folder click on the SOUND AND AUDIO DEVICESICON, when the SOUND AND AUDIO DEVICES window opensclick on the AUDIO pane, then under SOUND PLAYBACK choosethe USB AUDIO CODEC as a DEFAULT DEVICE,then you just clickon APPLY and you are ready to use the PS-626USB with your PC.ON A MACUnder the APPLE menu open SYSTEM PREFERENCES, and inSYSTEM PREFERENCES choose the SOUND icon, once in theSOUND window choose the OUTPUT pane and under CHOOSE ADEVICE FOR SOUND OUTPUT select USB AUDIO CODEC.Repeat the procedure for the INPUT pane, now your MAC is ready towork with the PS-626USB.15161719221923