Genie 4CH User Manual

Genie 4CH User Manual Manual pdf 30 page image

30【Channel】/【Recording Schedule】Drop-down menu, select the corresponding channel Number/Week to set, select “ALL” can set the all channelfunction enable in onetime;【Alarm Recording】Can record 3-5seonds video before the alarm event to occur（the timing depends on the capacity of video streaming）;【Time Slice】The means the recording mode of that channel currently in some time, “■” anti-display setting normal, alarm recording mode, canselect single or multi in it, four time slice for setting selectable. Under some recording mode and the time in different time slice, youcan duplicate to set, the time setting range is 00:00－24:00, after set the channel parameter, please press the save key to save thesetting in the system.Shortcut setting1) Duplicate the same setting from one channel to another channel, for example, select channel one, after recording mode setting, click the copyicon into the others.2) User should save the setting one by one after channel setting.3.6.4 Video DetectionNote:1) Select【Main Menu】Î【System Setting】Î【Video Detection】 to enter the setting menu;2) During motion mode switch, there is not None Area and Sensitivity setting in video loss and video cover detection;3) When there is a motion detection event in one channel, the symbol of motion detection will show in the channel;4) No need to use FN function key when you drag the motion detection area by mouse, click the right key of mouse to save the setting before exit, theuser press the SAVE to confirm before exit the Motion Detection menu.