Genie EDVRH-4 User Manual
Also see for EDVR-16: User guide
                                                                  | |
Contents
| 
27 DIGITAL VIDEO RECORDER3. Camera Setup1. Use Direction buttons [ ] to select “CAMERA” menu. Then, press [ENTER] button todisplay “CAMERA”.2. Use Left/Right buttons [ ] or Number button to select the Camera you wish to configure.3. Use Down [T] button to move specified menu and use Left/Right buttons [WX] toselect other item.4. Use [-, +] button to change the value.ITEM DEFAULT ADJUSTMENTBRIGHTNESS 50% y The brightness of each camera can be adjusted by pressing [-,+] buttons.CONTRAST 50% y The contrast of each camera can be adjusted by pressing [-,+] buttons.COLOR 50% y The color of each camera can be adjusted by pressing [-,+] buttons.SENSITIVITY 10 y Level 1: Low sensitivity~ Level 20: High sensitivity.MOTION GRIDy Use this menu to setup Zones for the motion detection The screen shown belowwill overlay the current video image.y Motion zones are set by on – it’s covered as cross stripes Screen.y It is divided into 16 Grid and selected by Number button on IR Remote.y : Select All.y : : Cover All.y Motion detected zones will be changed to BLUE Color. |
Related manuals for Genie EDVR-16
manualsdatabase
Your AI-powered manual search engine