Genie GS-1530 Service And Repair Manual

Also see for GS-1530: Operator's manual Operator's manual Operator's manual Operator's manual Operator's manual

Contents

Genie GS-1530 Service And Repair Manual Manual pdf 28 page image

Service and Repair Manual September 2016Specifications12 GS-30 • GS-32 • GS-46 • GS-47 Part No. 1272217Hydraulic H ose and Fitting T orque Specific ationsHydraulic Hose and FittingTorque SpecificationsYour machine is equipped with Parker Seal-Lok™ORFS or 37° JIC fittings and hose ends. Geniespecifications require that fittings and hose ends betorqued to specification when they are removedand installed or when new hoses or fittings areinstalled.Seal-Lok™ Fittings(hose end - ORFS)SAE Dash Size Torque-4 10 ft-lbs / 13.6 Nm-6 30 ft-lbs / 40.7 Nm-8 40 ft-lbs / 54.2 Nm-10 60 ft-lbs / 81.3 Nm-12 85 ft-lbs / 115 Nm-16 110 ft-lbs / 150 Nm-20 140 ft-lbs / 190 Nm-24 180 ft-lbs / 245 NmJIC 37° Fittings(swivel nut or hose connection)SAE Dash Size Thread Size Flats-4 7/16-20 2-6 9/16-18 1 ¼-8 3/4-16 1-10 7/8-14 1-12 1 1/16-12 1-16 1 5/16-12 1-20 1 5/8-12 1-24 1 7/8-12 1SAE O-ring Boss Port(tube fitting - installed into Aluminum)(all types)SAE Dash Size Torque-4 14 ft-lbs / 19 Nm-6 23 ft-lbs / 31.2 Nm-8 36 ft-lbs / 54.2 Nm-10 62 ft-lbs / 84 Nm-12 84 ft-lbs / 114 Nm-16 125 ft-lbs / 169.5 Nm-20 151 ft-lbs / 204.7 Nm-24 184 ft-lbs / 249.5 NmAdjustable Fitting Non-adjustable fitting1 jam nutSAE O-ring Boss Port(tube fitting - installed into Steel)SAE Dash Size Torque-4 ORFS / 37° (Adj)ORFS (Non-adj)37° (Non-adj)15 ft-lbs / 20.3 Nm26 ft-lbs / 35.3 Nm22 ft-lbs / 30 Nm-6 ORFS (Adj / Non-adj)37° (Adj / Non-adj)35 ft-lbs / 47.5 Nm29 ft-lbs / 39.3 Nm-8 ORFS (Adj / Non-adj)37° (Adj / Non-adj)60 ft-lbs / 81.3 Nm52 ft-lbs / 70.5 Nm-10 ORFS (Adj / Non-adj)37° (Adj / Non-adj)100 ft-lbs / 135.6 Nm85 ft-lbs / 115.3 Nm-12 (All types) 135 ft-lbs / 183 Nm-16 (All types) 200 ft-lbs / 271.2 Nm-20 (All types) 250 ft-lbs / 339 Nm-24 (All types) 305 ft-lbs / 413.5 Nm