Genie GS-3268DC Operators Manual With Maintenance Information

Also see for GS-2668DC: Operator's manual

Contents

Genie GS-3268DC Operators Manual With Maintenance Information Manual pdf 25 page image

Part No. 52546 Genie GS-2668 DC & GS-3268 DC 23Operator's ManualFirst Edition • Seventh PrintingTransport InstructionsObserve and Obey:Common sense and planning must be applied tocontrol the movement of the machine whenlifting it with a crane.Transport vehicle must be parked on a levelsurface.Transport vehicle must be secured to preventrolling while machine is being loaded.Be sure vehicle capacity, loading surfaces andchains or straps are sufficient to withstandmachine weight. See Specifications section.Machine must be on level surface or securedbefore releasing brakes.Securing to Truck or Trailer forTransitAlways chock machine wheels in preparation fortransport.Use tie-down points on chassis for anchoringdown to transport surface.Use chains or straps of ample load capacity.Turn key switch to the OFF position and removekey before transporting.Inspect entire machine for loose or unsecureditems.Brake Release Operation1 Chock wheels to prevent machine from rolling.2 Be sure winch line is properly secured to drivechassis tie points and path is clear of allobstructions.3 Turn the brake release knob counterclockwiseto open the brake valve.4 Pump the brake release pump knob.After machine is loaded:1 Chock wheels to prevent machine from rolling.2 Turn the brake release knob clockwise to resetthe brakes.Towing the Genie GS-2668 DC or theGS-3268DC is not recommended. If the machinemust be towed, do not exceed 2 mph / 3.2 km/h.